Operation Manual

104
Starting the program
1. Starttheprogramandselectyourtimer(seechapter3).
Z
The main menu opens.
2. In the register, click on the button Weekly Programs.
3. In the register, select the Channel for which you want to create the weekly
program,e.g.CH1=channel1.
Itispossibletospecifychannelsbydouble-clickingontheChannelstab.
Cycleprogramming
4. Select the switching command .
5. ClickwiththeleftmousebuttoninthelineforMondayontheeld09:00a.m.
tosettheONswitchingcommandandtheninthelineforFridayontheeld
07:00 p.m. to set the OFF switching command.
Z
Thewindow"Pulse/CycleSettings"opens.
6. Set the days, hours, minutes or seconds for the pulse duration.
7. Setthedays,hours,minutesorsecondsfortheperiodandconrmyourinput
by clicking on OK.
Z
The timer program is shown in the form of a graphic and in the form of
a table.
8.3 Weeklyprogram–Cycle
Abb. 29: Weeklyprogram-Cycle
2.
3.
Abb. 30: Weeklyprogram-Cycle2
4.
5.
Example
Channel1isswitchedONeveryhourfor10minutes,startingonMonday9.00
am. The end time is Friday 7.00 p.m.
Start time Monday 9.00 a.m.
Duration 10 min.
Period 1 hour
End time Friday 07.00 p.m.
6.
7.