Operation Manual
79
EN
Manual Override (with OTC regulation)
Symbol:
+ otc
With OTC regulation, you can use the manual override function to shift
the current heating curve in parallel, in order to increase or decrease
the room temperature
Use the
keys to set the desired nominal value between -5 and
+5, ie, a shift in the heating curve by 5 K maximum A confirmation
by pressing OK is not required The set value is valid for the current
period and is maintained until the next program change (time and
temperature)
To return to Automatic mode, press the upper keys for 3 seconds or open the housing cover
and press the OK key