User's Guide

71
Video setup
Video settings
Standard settings
To make sure that (some of) the camera functions are not set to unusual values, a standard
file has been defined that contains the default values for most video functions. The
Reference tables, on page 91 list the (default) values that are set when the standard file is
recalled.
To recall the standard values for the various video functions, press the STD button on the
left side of the camera and hold it for two seconds. The standard values only take effect
when the camera is not On Air.
The standard file can be selected as either a factory or a customer standard file. Changing
the standard file can only be done in the
Security menu if a PIN code is used.
Non-standard indicator
The non-standard indicator in the ocular viewfinder lights when one of the following
conditions occur (refer to the user’s guide of the viewfinder for more details):
• Black Stretch is switched on
• Extended Auto Iris is switched on
• AWC or FL50/FL60 color temperature is selected
Video mode
In the Main video menu, go to Setup > Video. Tap the VideoMode item to select the video
mode you wish to use for your production.
In the camera menu, go to the Production Setup > Video Mode item and select the video
mode.
Sensitivity mode
To obtain the best results under different lighting conditions, the camera’s sensitivity mode
can be selected.
1)
In the Main video menu, go to Setup > Video. Tap the Sensitivity Mode item and select
the sensitivity mode.
In the camera menu, go to the Production Setup > Sensitivity item and select the
sensitivity mode.
The following sensitivity modes are available:
CGA
CAM
CGA
CAM