User's Guide

57
LDX 100
User’s Guide
(10) Range Extender indicator
Lights when a Range Extender is enabled.
(15) Gain indicator
Lights when gain is lower than 0 dB or if gain is higher than +3 dB.
(16) Non-standard indicator
The non-standard video settings indicator (!) lights when one or more of the following
conditions occur:
• Exposure Time is not set to the nominal value;
• Black Stretch is switched on;
• Extended Iris is switched on;
• AWC (Auto White Continuous or automatic white balance) or FL color temperature is
switched on.
Information pages
Press and hold the info button at the front or at the back panel of the camera to view
information on the viewfinder screen. The first info page appears in the viewfinder or
monitoring channel. Press the info button again to scroll through 4 pages. Release the
button and after a few seconds the info page disappears.
Page 1: IP connection page
Page 2: Video and camera modes page
Page 3: Basic video settings and buttons page
This info page shows mostly identification and operational information.
Present
Los
Link
TX Mb/s
RX Mb/s
QSFP
No
SFP1
Yes
Ok
Yes
11032
2208
SFP2
No
10.11.5.2
10.11.6.2
10.12.7.2
QSFP IP
SFP1 IP
SFP2 IP
VideoMode
CameraMode
IP mode
4k/50
IP
25G