User's Guide

49
LDX 100
User’s Guide
If there are only two values associated with the function, then pressing the select button
toggles between these two values. If a value is displayed next to a function that is one of
several possible values, then pressing the select button places the cursor in a list menu
indicating the value currently selected. Use the rotary control to point to a new value. Press
the select button to return the cursor to the function list.
If an analog value is displayed next to a function name, then pressing the select button
places the cursor in front of the value and the rotary control is used to change the analog
value. Press the select button to return the cursor to the function list.
Undoing changes
If you make changes to the video settings in the camera menu and you decide not to keep
them, use the green standard button at the side of the camera to recall a standard set of
values for the video parameters.
Assigning user buttons
The camera has three assignable buttons: two on the left side panel (SW1 and SW2) and
one under the handgrip. The operation of the RET and the VTR button on the lens can also
be assigned. The assignment and switching mode (momentary or alternating) of these
buttons can be set in the
Operator Toolbox > User buttons menu.