User's Guide

Operating instructions

Leaving the camera menu

If you are deep within the menu structure, the recommended way of leaving the menu is to

press the back button a number of times until the menu is abandoned. You can also

navigate to leave the menu:

• If necessary move the cursor to the left column with the menu or back button.

• Scroll upwards with the rotary control until the cursor points to Top (the Main menu).

• Press the select button. The cursor now points to the Menu off item of the Main menu.

• Press the select button again to leave the camera menu.

If you do not use the menu it disappears after a few seconds. This delay can be

programmed in the

Operator Toolb ox menu. You can also press and hold the or back

button for 2 seconds to make the menu disappear.

When you press the select button again you enter the camera menu at the last position of

the cursor and not at the top of

Main menu.

To prevent confusion the next time you enter the camera menu, it is advisable to leave the

menu by using the back button or by returning to the

Main menu and selecting Menu Off.

Making value changes

To find out where you have to go to change a function, consult the camera menu reference

to discover under which menu group or sub-group the function you want to change is

located. If the cursor points to an item (and there are no double arrows to indicate a sub-

menu) then the item pointed to has a value. This value can be:

• a toggle value (only two values, like on and off)

• a list value (more than two values)

• an analog value (in most cases variable from 0 to 99)

•unavailable.

If the value is unavailable it cannot be changed. This is indicated by three dashes (- - -). This

can occur, for example, when a function is switched off. The analog values associated with

that function are then unavailable.

Levels

Exposure

Color

Image Control

Files

Production Setup

Video Mode

Sensitivity

720p50

Nom

TOP