User's Guide

47
LDX 100
User’s Guide
Entering the camera menu
Push the menu button after the camera is switched on, the message Menu off appears in
the viewfinder. Press the menu button again while this text is showing, the
Main menu
appears in the viewfinder.
The Main menu screen shows five items. The name of the menu is shown below these.
More items are hidden but become visible when you scroll down using the menu button.
The cursor shows your position in the menu. Turn the menu button to move the cursor up
and down.
Finding your way
Turn the menu button to move the cursor through the menu items. If a double arrow (>>) is
visible, then pressing the select button brings you one level lower in the menu system. Only
five items are visible in each menu. Scroll up or down to see any additional items. When you
first enter a menu (other than the
Main menu) the cursor is positioned next to the first
item.
Press the back button to go back to the menu that you were in before the current one. The
cursor is positioned next to the last menu.
You can also use the To p and Previous items to navigate. These items are not immediately
visible but are located above the first item. Use the rotary control to scroll up to them.
• Select To p to bring you back to the Main menu.
• Select Previous to go back to the menu that you were in before the current one.
The Production Setup menu, for example, shows the items displayed when you first enter
the menu. The other items are available by scrolling up or down with the rotary control.
Menu Off
Installation menu
Operator Toolbox
Production Setup
Creative Control
Main
Exec
>>
>>
>>
>>
Diagnostics >>