User's Guide

IP Media setup

PTP tab

AES67 Channel mapping for audio and intercom

For the audio and intercom audio channel mapping on the IP Media Network, refer to the

table below:

PTP tab

The XCU can be synchronized over the IP Media Network to a PTP grandmaster clock using

the Precision Time Protocol (PTP).

• The PTP sub tab can be found by clicking the double arrow (<<) at the left. The PTP sub

tab is located in the first group of tabs.

The list of camera systems is shown, sorted by camera number. In this tab you can set up

synchronization to a PTP grandmaster.

Click the camera system you want to set up. The edit popup window appears in which you

can edit the following parameters:

Ch 1 Ch 2 Ch 3 Ch 4 Ch 5 to 8/16

Output stream

Audio A1 Cam Audio 1 Cam Audio 2 Cam AES1 Cam AES2 (digital silence)

Intercom A1 Eng Prod (digital silence) (digital silence) (digital silence)

Input stream

Audio A1 Prog intercom Prog spare (not used) (not used) (not used)

Intercom A1 Eng Prod Prog intercom Prog spare (not used)