User's Guide

35
LDX 100
User’s Guide
AES67 Intercom Out
Enabled — selects whether the AES67 intercom output is included in the IP Media Network
stream and to which port the stream is sent:
• Port A: AES67 intercom is routed to Port A (default setting).
• Port A+B: AES67 intercom is routed to both Port A and B to establish a redundant
network connection.
• Off: AES67 intercom is NOT inserted into the IP Media Network stream (this is also
indicated with the indication off in front of Stream 1).
Channels — Number of audio channels that is inserted into AES67 intercom output. Can be
2,4,6, 8 or 16 channels.
Packet Time — Selects packet time of the AES67 intercom output audio packets.
Port A output
Dest. IP address — the destination IP address for Port A to which AES67 intercom output is
sent.
Dest. Port — the destination port number for Port A for AES67 intercom output.
Port B output
☞
Note
☞
Note
Port B is only used when redundant operation is enabled.
Dest. IP address — the destination IP address for port B to which AES67 intercom output is
sent.
Dest. Port — the destination port number for Port B for AES67 intercom output.
AES67 Intercom In
Present — indicates whether AES67 intercom input is present on the IP Media Network.
Multicast — Yes or No. Select whether you want to use multicast or not.
Multicast IP — the receiving multicast IP address, when Multicast = Yes.
Channels — Number of audio channels that is inserted into AES67 intercom input. Can be
2,4,6, 8 or 16 channels.
Buffer Size — Selects buffer size for AES67 intercom input. Can be 0.33 ms, 0.67 ms, 1 ms, 2
ms, 3 ms, 4 ms, 8 ms or 15 ms.
✎
Tip
Check the ‘Apply settings to all camera systems’ box and press OK to apply the (changed)
settings in this window to all camera systems (where applicable).