User's Guide

29
LDX 100
User’s Guide
Monitoring
Enabled — selects whether the Monitoring video is included in the IP Media Network
stream and to which port the stream is sent:
• Port A: Monitoring video is routed to Port A (default setting).
• Port A+B: Monitoring video is routed to both Port A and B to establish a redundant
network connection.
• Off: Monitoring video is NOT inserted into the IP Media Network stream (this is also
indicated with the indication off in front of Stream 1).
Standard — this is the transport standard for Monitoring video. Select either ST2022-6
(embedded SDI with audio and ancillary data over IP) or ST2110-20 (Video essence over IP).
Port A output
Dest. IP address — the destination IP address for Port A to which Monitoring video is sent.
Dest. Port — the destination port number for Port A for Monitoring video.
Port B output
☞
Note
☞
Note
Port B is only used when redundant operation is enabled.
Dest. IP address — the destination IP address for port B to which Monitoring video is sent.
Dest. Port — the destination port number for Port A for Monitoring video.
Live video
☞
Note
☞
Note
Live video is only present when HDR is enabled and/or when the XCU is running in a 4K
video mode.
Enabled — selects whether the Live video is included in the IP Media Network stream and
to which port the stream is sent:
• Port A: Live video is routed to Port A (default setting).
• Port A+B: Live video is routed to both Port A and B to establish a redundant network
connection.
• Off: Live video is NOT inserted into the IP Media Network stream.
Standard — this is the transport standard for Live video. Select either ST2022-6 (embedded
SDI with audio and ancillary data over IP) or ST2110-20 (Video essence over IP).
Port A output
Dest. IP address — the destination IP address for Port A to which Live video is sent.
Dest. Port — the destination port number for Port A for Live video.