User's Guide

26
IP Media setup
Main video in 4K uncompressed mode
With the 4K Output compression mode set to Uncompr, click the camera system you want
to configure. A popup window appears in which you can set the following parameters:
Main Video
Enabled — selects whether the Main video is included in the IP Media Network stream and
to which port the stream is sent:
• Port A: Main video is routed to Port A (default setting).
• Port A+B: Main video is routed to both Port A and B to enable redundant network
operation.
• Off: Main video is NOT inserted into the IP Media Network stream (this is also indicated
with the indication off in front of stream 1).
Standard — this is the transport standard for IP Main Video. Select either ST2022-6
(‘embedded SDI with audio and ancillary data over IP’) or ST2110-20 (‘Video essence over
IP’).
4K Output — in this case Uncompr is selected.