User's Guide

25
LDX 100
User’s Guide
• Port A+B: Main video is routed to both Port A and B to enable redundant network
operation.
• Off: Main video is NOT inserted into the IP Media Network stream (this is also indicated
with the indication off in front of stream 1).
Standard — this is the transport standard for Main video. Select either ST2022-6
(‘embedded SDI with audio and ancillary data over IP’) or ST2110-20 (‘Video essence over
IP’).
Stream 1 (port A):
Dest. IP address — the destination IP address to which the stream is sent.
Dest. Port — the destination port number for the stream.
☞
Note
☞
Note
When the same IP address is used for the Main video, Monitoring video and/or Live video
streams, the port numbers for each stream MUST be set to different values.
Main video in 4K uncompressed mode
In the IP Main A tab you can set up IP addresses and port numbers for the four (sub)streams
of the 4K uncompressed Main video outgoing stream. The transport standard for Main
video is also selected in this tab.
When the window does not display the four (sub)streams as indicated in the example
above, the compression mode needs to be set to Uncompressed first. To do this, click the
camera system you want to configure. A popup windows appears. Set the 4K Output item
to Uncompr (indicated in red below) and click OK to activate the changes.