User's Guide

IP Media setup

Main video

In the IP Main A tab you can set up IP address and port number for the Main video outgoing

stream for the primary IP Media Network Port. The transport standard for Main video is also

selected in this tab.

Present indicator for Main video (sub) stream:

Normally, Main video is sent as a single IP stream but with uncompressed 4K the signal is

split into four (sub)streams.

Click the camera system you want to configure. A popup window appears in which you can

set the following parameters:

Main Video

Enabled — selects whether the Main video is included in the IP Media Network stream and

to which port the stream is sent:

• Port A: Main video is routed to Port A (default setting).

Off

(Sub) stream is disabled

(Sub) stream is enabled and stream is active.

(Sub) stream is enabled but stream is not active.