User's Guide

23
LDX 100
User’s Guide
☞
Note
☞
Note
A green light does not indicate a correct communication link between XCU and the 10 G IP
device.
Click the camera system you want to set up. A popup window appears and you can edit the
following parameters:
Port A1 IP — this is the local IP address of Port A1 in the IP Media Network. It is
recommended to use an IP address in the 10.11.5.xxx range.
Port A2 IP — this is the local IP address of Port A2 in the IP Media Network. It is
recommended to use an IP address in the 10.11.5.xxx range.
Subnet mask — for most situations the subnet mask is set to 255.255.0.0. This is also the
default value.
Default gateway — for most situations the default gateway is set to 10.11.5.1. This is also
the default value.
☞
Note
☞
Note
Do not use IP address 10.11.5.1 as it is already in use for the Default Gateway. If you still
want to use this address then you must enter a different default gateway.

Make sure to set unique IP addresses for each camera system in the IP Media Network to
avoid network conflicts.