User's Guide

IP Media setup

Camera Connect

☞

Note

☞

Note

Make sure the version of Camera Connect 1.64 or higher.

Camera Connect is Grass Valley’s configuration and setup tool for camera systems. The

software comes pre-installed on the CCS-One Cameras Control Server and can be accessed

through the C2IP network by a web-browser that runs on a PC or tablet computer.

• Make sure you are connected to the C2IP network. Open the web-browser on your

device and enter one of the following links:

• http://10.127.44.32/camconnect

• http://169.254.0.201/camconnect

• The Camera Connect login window is shown:

• Enter user name and password. The default login name is admin and the password

admin (these can be changed after login).

• Click or tap Login. The Camera Connect user interface is shown.

☞

Note

☞

Note

All user entries in the Camera Connect application are case sensitive.

Click the IP tab at the top op the page; a row of sub tabs appears. The following sub tabs are

used to configure the IP Media Network: Network Ports, NMOS, Main Video, Highspeed

Video, Live | Mon, Extern Video, Audio, Intercom, PTP, DirectIP and DirectIP+: