User's Guide

13
LDX 100
User’s Guide
Adjusting the handgrip position
The handgrip position can be adjusted along the axis of the camera body.
• Loosen the locking disc by turning it counterclockwise using your thumb and index
finger.
• Press both sides of the handgrip clip using your thumb and index finger and with the
lever pressed in, move the handgrip back or forth.
• When the desired position is reached release the clip. Note: the rail on the camera body
has indents so make sure to place the handgrip is placed at a fixed position.
• Tighten the locking disc by turning it clockwise.