User's Guide

11
LDX 100
User’s Guide
Caution
Failure to attach the camera to the tripod adapter plate in the correct manner could result
in an unsecured camera. Ensure that the rear stud (2) is engaged and that the camera clicks
into place.
Remove the camera from the tripod as follows:
• Open the locking lever (5) to free the rear stud (2).
• Press and hold the red locking lever (3) against the release handle (4).
• Ensure that you have a firm hold of the camera.
• Pull the release handle (4) forward.
• Move the camera backwards and up.
2
3
4
1
5