User's Guide

8
Installation
Positioning the viewfinder
Positioning the viewfinder
Horizontally
The horizontal position of the viewfinder can be adjusted as follows to suit your
preferences:
• Loosen the locking ring (1). As seen from the rear of the camera, turning the locking
ring counterclockwise moves it towards the handgrip.
• Slide the viewfinder horizontally along the rail to the desired position.
• Tighten the locking ring (1) again by turning clockwise.
Angular
Hold the viewfinder eyepiece with your hand and rotate it to the desired angle.
Laterally
The viewfinder can be positioned backwards and forwards along the camera axis (lateral):
• Loosen the locking disc (1) by turning it counterclockwise using your thumb and index
finger.
• Press both sides of the handgrip clip (2) using your thumb and index finger and with
the lever pressed in, move the handgrip (with viewfinder) back or forth.
• When the desired position is reached release the clip. Note: the rail on the camera body
has indents so make sure to place the handgrip is placed at a fixed position.
• Tighten the locking disc (1) by turning it clockwise.
1
viewfinder
eyepiece