User's Guide

125
LDX 100
User’s Guide
CAWB Speed 1..40 (4) S — Sets the speed for the Auto White Balance procedure.
CAWB Gain 1..40 (10) S — Sets the gain value for the Auto White Balance
procedure.
Network
Camera Number 1..99 (1) 0 — Selects logical camera number.
IP Settings
IP Mode DHCP, Auto, Manual 0 — Selects automatic, manual or DHCP IP mode for C2IP
network.
Subnet Mask 0..31 (0) 0 — Selects the subnet mask (when IP mode is set to
manual).
IP <IP address> 0 — Sets camera IP address in the C2IP network (when IP
mode is set to manual).
Def GW <GW address> 0 — Selects camera head default gateway IP address
in the C2IP network (when IP mode is set to manual).
Apply Settings Exec, .... 0 — Select Exec to apply the new IP settings.
Nameserver 1
Use Server No, Yes 0 — Select Yes to enable use of the C2IP Name Server 1 
Note: Nameserver license must be installed on the
Camera Connect.
Status Off, Unknown, Active,
Unavail
0 — Shows currrent status of Name Server 1
IP <IP address> 0 — Selects Name Server 1 IP address.
Apply Settings Exec, ... 0 — Select Exec to apply the new IP settings
Nameserver 2
Use Server No, Yes 0 — Select Yes to enable use of the C2IP Name Server 2 
Note: Nameserver license must be installed on the
Camera Connect.
Status Off, Unknown, Active,
Unavail
0 — Status of Nameserver 2
IP <IP address> 0 — IP address for Nameserver 2
Apply Settings Exec, ... 0 — Select Exec to apply the IP settings
PCI ID 0..8 (1) S — ID for external PC operation
Signals
Live2K
Mode 1080p, 1080i 3 — Selects Video mode for Live2K signal
Source HDR, SDR 3 — Selects Dynamic range for Live2K signal
BNC Ref/AES Ref In, Aes In, TriLvl,
Composite
0 — Selects signal/function of the REF/AES BNC connector
Function: Values: U: F: Description: