User's Guide

123
LDX 100
User’s Guide
Tracker Eng Off, Left, Right, Both 1 — Selects to which ear muff(s) of the Tracker headset the
engineering intercom is routed.
Tracker Prog Off, Left, Right, Both 1 — Selects to which ear muff(s) of the Tracker headset the
program intercom is routed.
Tracker ProgExt Off, Left, Right, Both 1 — ???
Tracker Cam Off, Left, Right, Both 1 — Selects to which ear muff(s) of the Tracker headset the
camera headset microphone signal is routed.
Tracker Lvl 0..99 (75) 1 — Sets Tracker headset level.
Tracker Boost Off, On 1 — ???
Audio
Audio Gain Mode Local, Extern 1 — Loc (= local): audio gain level is controlled by the
settings in this menu
Extern (= external): audio gain level is (for both
channels) controlled by the XCU when the camera
mode is XCU.
Audio Delay 0 ms..170 ms (0 ms) 1 — Sets an audio delay
Front Mic
FrontMic Source Line, Mic, Mic48V 1 — Selects source input sensitivity for the Front Mic: either
Line or Mic level or Mic level with phantom power.
FrontMic Level -22dB, -28dB, -34dB, -
40dB, -46dB, -52dB, -
58dB, -64dB
1 — Selects input gain level for Front Mic (when Audio Gain
Mode is set to Local).
FrontMic HPF Off, On 1 — Switches High Pass Filter for Front Mic input on or off.
Use to reduce 50 Hz and 60 Hz hum or low frequency
noise.
FrontMic ALC Off, On 1 — Switches Auto Level Control for Front Mic on or off.
Audio 1
Audio 1 Input Front, Rear 1 — Selects which connector to use as the input source for
Audio channel 1: Front (of camera) or Rear (back panel)
Audio 1 Source Line, Mic, Mic48V 1 — Selects source input sensitivity for the Audio 1, either
Line or Mic level or Mic level with phantom power.
Audio 1 Level -22dB, -28dB, -34dB, -
40dB, -46dB, -52dB, -
58dB, -64dB
1 — Selects input gain level for Audio channel 1 (when
Audio Gain Mode is set to Local).
Note: when Audio Gain Mode is set to Extern(al), Audio
1 Level is set by the XCU.
Audio 1 HPF Off, On 1 — Switches High Pass Filter for Audio channel 1 on or off.
Use to reduce 50 Hz and 60 Hz hum or low frequency
noise.
Audio 1 ALC Off, On 1 — Switches Auto Level Control for Audio channel 1 on or
off.
Audio 2
Function: Values: U: F: Description: