User's Guide

120
Menu references
Configuration menu
Filename <file name> 2 — Displays the selected file name.
Attribute R/W, R 2 — Selects the attribute for the selected file:
R/W = Read and Write; R = Read only.
USB
Name <text> — Displays USB device name.
Free Space 0 MB..65535 MB (0 MB) — Displays free space left on USB in Mb.
No of Files 0..255 (0) — Displays number of files stored on USB.
USB Files
File Select Scene 0 — Selects a file on the USB device.
Delete Exec, ... — Deletes the selected file.
Filename <text> — Changes name of the selected file.
Attribute R/W, R — Selects the attribute for the selected file:
R/W = Read and Write; R = Read only.
Reference SDI Input, PTP, TriLvl,
Composite, FreeRun
0 —
XCU Conn (only when camera is in XCU mode)
ConnectType Cable, DirectIP, DirectIP+ 2 — Select Connect Type: Cable (=XCU mode), DirectIP or
DirectIP+

Note: the DirectIP/DirectIP+ license must be installed
(???)
XCU Name <name> 2 — In XCU mode, enter the name of the XCU that connects
with the camera.
Note: the DirectIP/DirectIP+ license must be installed
(???)
Disable Camera Off, On 0 — Locks all camera buttons to prevent
Lens
Z/F Settings 0 — ???
Lens Settings
Lens Connector SXP, Camera 0 — Selects the lens connector to be used. Select Camera
when a normal lens is used with the SuperXpander
(Only when a SuperXpander is present).
Lens IF Type Analog, Digital 0 — Selects a digital or analog lens interface.
Lens IF Status OK, Not OK 0 — Shows the status of the lens interface (when a digital
lens interface is used).
RE Iris Comp Off, On 0 — Switches Iris compensation on or off. Use
this setting to compensate for Iris level
when a range extender (RE) is used.
Lens Corrections
CLASS
Function: Values: U: F: Description: