User's Guide

114
Menu references
Creative Control
Reset Exec, ... 3 Resets the color corrector to its default values. All sets
are reset.
Col Protect
Col Protect Off, On 3 Switches Color Protect on or off.
Col Prot Lvl 0%..150% (75%) 3 Sets Colors Protect level.
Sharpness
Detail
Detail Off, On 3 Switches Detail on or off.
Detail Level 0..99 (50) 2 Sets Detail level: the amount of Detail added to the
video signal.
Detail Source R+G, R, G, Y 3 Selects the video component that is used to generate
Detail signal.
Texture 0..99 (50) 3 Sets Texture Level: adds sharpness to texture surfaces in
the image.
Soft Detail Off, On 3 Switches Soft Detail on or off.
Soft Detail Lvl 0..99 (50) 2 Sets the level of Soft Detail added to the video signal.
Advanced
Vert Detail Lvl 0..99 (25) 3 Sets the level of the vertical component in the Detail
signal.
Coarse/Fine 0..99 (90) 3 Sets detail balance between coarse and fine structures
in the image (0 = coarse structures are sharpened, 99 =
fine structures are sharpened).
Detail Level 0..99 (50) 3 Sets (overall) Detail level: the amount of Detail added to
the video signal. Note: this is the same function as
<Detail Level> above.
Level Dep 0..99 (30) 3 Sets the detail reduction level for shadow areas.
Noise Slicer 0..99 (10) 3 Sets the level of the noise slicer for Detail.
Texture Enabled, Disabled 3 Enables or disables Texture function.
Dtl Flw Gain Off, On 3 When switched on, Detail level follows Gain level.
Dtl Flw Zoom Off, On 3 When switched on, Detail level follows Zoom factor.
HDR Detail
Detail Off, On 3 Switches HDR Detail on or off.
Detail Level 0..99 (50) 2 Sets the level of detail added to the video signal.
Detail Source R+G, R, G, Y 3 Selects the video component that is used to generate
HDR Detail signal.
Advanced
Coarse/Fine 0..99 (50) 3 Sets HDR Detail balance between coarse and fine
structures in the image(0 = coarse structures are
sharpened, 99 = fine structures are sharpened).
Function: Values: U: F: Description: