User's Guide

113
LDX 100
User’s Guide
Advanced
Knee Mode Compat, PwrCurves S Selects Knee: Auto = automatic ; Var = variable; Off =
Knee is switched off.
Knee Limit 0..99 (99) S Selects the level above which the Knee Limiter is active
(when Knee = Var).
Desat Off, On 3 Switches Desaturation on or off. This desaturates color
above Knee to cancel out unwanted color casts.
Desat Level 0..99 (50) 3 Sets Desaturation level (0=no desaturation, 99 =
maximum desaturation)
Auto Point 0..99 (30) S Sets the point where compression starts (when Knee =
Auto)
Auto Ref 0..99 (30) S Sets the reference level for Knee (when Knee = Auto)
Flare
Flare Off, On S Switches flare correction on or off.
Red 0..99 (6) S Sets flare correction level for Red.
Green 0..99 (9) S Sets flare correction level for Green.
Blue 0..99 (11) S Sets flare correction level for Blue.
Color
Color Adjustment
Color Corr
Col Corr Off, On 3 Switches color corrector on or off. All active sets are
used when color corrector is on.
Col Corr View Off, On 3 Switch on to view the selected color area in the main
signal.
VF View Off, On 3 Switch on to view the selected color area in the
viewfinder.
Set 1,2,3,4,5,6 3 Selects a color correction set.
Set On/Off Off, On 3 Switches the selected color corrector set on or off. Note:
when off, settings can not be changed.
Color 0..359.99 (0) 3 Sets the color area by hue (in steps of 22.5 degrees)
Width 22.5..360 (0) 3 Sets the color area hue width (in degrees).
Hue -180..180 (0) 3 Sets the hue (in degrees) for the selected area.
Sat 0..99 (0) 3 Sets the saturation level for the selected area.
Luminance 0..99 (0) 3 Sets the luminance level for the selected area.
Color Name B+, MG-, MG, MG+, R,
R+, YL-, YL, YL+, G-, G,
G+, CY, CY+, B-, B
3 Shows color area name:
B: Blue; MG: Magenta; R: Red; YL: Yellow; 
G: Green; CY: Cyan
Smoothing Sharp, Medium, Smooth 3 Selects method for smoothing transitions between
affected and nonaffected areas.
Function: Values: U: F: Description: