User's Guide

105
LDX 100
User’s Guide
Production Setup
Function: Values: U: F: Description:
Levels
Gain
HDR Gain -18 dB..18 dB (0 dB) 2 S HDR Gain (in 0.1 dB steps.)
HDR Out Lvl 50% .. 87% (57% for
SMPTE2084)
50% .. 87% (73% for
HLG)
2 - HDR Output Level: this is the HDR video level that
corresponds with 100% video level in SDR.

Note: default values depend on the selected HDR
Standard.
Gain Presets
Gain - -18 dB..30 dB (-3 dB) 2 O Gain value for - preset
Note: Available preset values depend on the selected
sensitivity mode
Gain + -18 dB..30 dB (3 dB) 2 O Gain value for + preset.
Note: Available preset values depend on the selected
sensitivity mode
Gain ++ -18 dB..30 dB (6 dB) 2 O Gain value for ++ preset
Note: Available preset values depend on the selected
sensitivity mode
Gain +++ -18 dB..30 dB (-12 dB) 2 O Gain value for +++ preset
Note: Available preset values depend on the selected
sensitivity mode
Black
Black Stretch Off, On 3 S Enable/disable Black Stretch
Black Str Level 0..99 (50) 3 S Black Stretch Level: 0 = few shades of grey; 99 = more
shades of grey. Note: values below 50 are Black Press,
values higher than 50 are Black Stretch.
Black Str Type Press, Stretch 3 S Black Stretch type. Black Stretch increases the tonal
scale in shadow areas and Black Press decreases the
tonal scale.
Full Black Off, On 3 - Select to run Full Black calibration.
Note: this takes up to 15 seconds to complete
Master Black 0..99 (50) 2 S Master Black level: this is the video level that is
considered as pure black
Advanced
Master Black 0..99 (50) 3 S Master Black level: this is the video level that is
considered as pure black.
Black R 0..99 (50) 3 S Black level for Red
Black G 0..99 (50) 3 S Black level for Green
Black B 0..99 (50) 3 S Black level for Blue