User's Guide

101
LDX 100
User’s Guide
VF Mode Combined, 1 Phase,
2
Phases, 3 Phases
2 - (only for high speed video modes)
Method of combining high speed phases for the
viewfinder output:
Combined: all phases are combined to obtain the
highest signal level for live viewing. Some blurring may
occur when panning or tilting.
1 Phase: only 1 phase is used to obtain highest
sharpness but lower video levels.
2 Phases: same as above but with 2 phases.
3 Phases: same as above but with 3 phases.
Note: try the setting that suits your situation best.
Menu Settings
Rotary Speed 1..10 (5) 2 O Reaction speed of the front rotary button
Menu Display On,Time 2 O Camera menu alwasy on or or disappear after a set time
Menu Time 3..30 (10) 2 O Time (in seconds) the menu is shown when Menu
Display is set to Time.
Menu White Lvl 0..99 (70) 2 O White level (brightness) of the characters of the menu
Info Settings
Info Start Page 1,2,3,4 2 - First page shown when info button is initially pressed
Info Display On, Off 2 - Time (in seconds) the info page is shown when Info
Display is Off.
Info Time 3..30 (10) 2 - Sets the time (in seconds) the info page is shown.
Intercom
Prod Vol Ctrl Prod, Master 3 O Selects if the Prod volume control (upper rotary on the
back panel) controls Prod channel volume only (Prod)
or overall (Master) intercom volume.
Cam Sidetone 0..99 (75) 3 O Sets the sidetone level (audio feedback from mic to
headset) in the camera operator’s headset.
Tracker Sidetone 0..99 (75) 3 O Sets the sidetone level (audio feedback from mic to
headset) in the tracker’s headset.
User Buttons
Ret A Preset Off, Ext1, Ext2, Ext3, TP 0 O Selects which signal is shown in the viewfinder when
the Ret A button at the front panel is pressed
Ret B Preset Off, Ext1, Ext2, Ext3, TP 0 O Selects which signal is shown in the viewfinder when
the Ret B button at the front panel is pressed
Front Panel
Eng Mode Mom, Alt 0 O Switching mode for the Eng button at the front panel of
the camera: momentary (push) or alternating (toggle)
Ret A Mode Mom, Alt 0 O Switching mode for the Ret A button at the front panel
of the camera: momentary (push) or alternating
(toggle)
Function: Values: U: F: Description: