User's Guide

99
LDX 100
User’s Guide
Left 0..99 (33) 0 O Left position of the Box
Right 0..99 (66) 0 O Right position of the Box
Zebra
Zebra Off, On 0 O Switch Zebra indication on or off. Zebra is a diagonal
line pattern that indicates that the area affected has
risen above a preset level of the full scale video
exposure value
Zebra Mode Level, Band 3 O Zebra mode:
Level: Zebra indication appears in areas are brighter
than the set level

Band: Zebra indication appears in a 2.5% band around
the set level
Zebra Level 0%..117% (90%) 3 O Exposure level at which Zebra pattern is shown. When
level is higher than 100% the zebra indicates
overexposed areas
Zebra Contrast 0..99 (15) 3 O Zebra Contrast
Ind White Lvl 0..99 (70) 2 O White level (= brightness) of the indicators: 0 = very
dark; 99 = very bright
Viewfinder
OnScreen Tally Off, Top, Bottom 2 O On Screen Tally (signalling) indicators to be displayed
at the top or at the bottom of the viewfinder screen.
Select Off to turn the indicators off
Assignments Show, Hide 2 O
Button Leds Off, Low, Medium, High 2 O Brightness level of the viewfinder menu buttons
Backpanel
Info Leds Low, High 2 - Brightness level of the IP diagnose indicators on the
back panel
Button Illum 0..99 (75) 2 - Brightness level of button illumination
Outside Illum On, Off 2 - Switches outside Illumination on or off.
Level 0..99 (75) 2 - Outside illumination brightness level (when outside
Illumination is switched on)
AutoIris Area Off, On 3 O Switches AutoIris Area indication on or off
VF Monitoring YCrCb, Y, R, G, B, -G, R-G,
B-G
2 O Type of signal to view in viewfinder
VF HDR Knee
HDR Kn Max In 100..10000% (2000%) 2 O
HDR Kn Point 20%..100% (70%) 2 O
VF Peaking
Peaking Lvl 0..99 (20) 0 O Peaking level applied to the viewfinder signal (same
control as peaking level rotary on the viewfinder)
Function: Values: U: F: Description: