User's Guide

Video setup

Skin Detail

Auto Skin Detail

Carry out the Auto Skin Detail procedure as follows:

1 In the camera menu, navigate to the Creative Control > Sharpness > Skin Detail

and use the Skin Gate item to select 1, 2 or 3. Do not select any of the combined

options.

2 Place the cursor in front of the Auto Skin Dtl function.

3 Press the select button on the front of the camera. The following appears in the

viewfinder:

4 Now point the two small black boxes at the intended surface (generally a face).

5 Press the select button again to start the measurement procedure (the iris is

automatically set to auto by the camera). The process running message appears:

6 When the process is completed (within a few seconds) the OK message appears in the

viewfinder:

7 Now adjust the Skin Detail level with the Skin Level item. Decrease the value below 50

to soften the selected area. Increase the value above 50 to add extra detail.

ASKIN: window

ASKIN: running

ASKIN: OK