User's Guide

85
LDX 100
User’s Guide
the details in the picture are still maintained. If a dominant color saturates, Color Protect
gradually decreases its influence in the picture.
In the camera menu, navigate to the Production Setup > Color > Color Adjustment >
Col Protect menu and switch on the item Col Protect.
Secondary color correction
Secondary color correction is used to adjust hue, saturation and luminance of partial areas
of the color spectrum of the image. Typical applications include live sports or news
productions. Up to six color areas can be set up and corrected at the same time.
Setup using the camera menu
Carry out the following steps to set up the color corrector in the camera menu:
1In the Creative Control > Color Adjustment > Col Corr menu, switch the item Col
Corr
on.
2Go to the item Set and select a color correction set.
3Switch on the item Set On/Off to activate the selected set.
4 Select a color area by changing the Color and Width functions. The color can be
selected in steps of 22.5° on the color wheel. The color area width can be enlarged by
setting the
Width value. The color width can be varied between 22.5° and 360°.
5 There are two ways of viewing the selected color area: in the main video signal or in the
viewfinder. Switch on the item
Vf View to view the area in the viewfinder. To view the
area in the main signal switch on the item
Col Corr View. Make sure to switch it off
before going on air.
CAM
MG-
0°
MG
MG+
RR+
YL-
YL
YL+
G-
G
G+
CY CY+
B-
B
B+
22.5°
337.5°
315°
292.5°
270°
247.5°
225°
202.5°
180°
157.5°
45°
67.5°
90°
135°
112.5°
Color hue shift (-180° to +180°)
Color width (22.5° to 360°)
CAM