User's Guide

84
Video setup
Saturation
7 When the process is completed (within a few seconds) the OK message and the
measured color temperature appears in the viewfinder:
8 The measured color temperature is now stored in the selected memory position and
can be recalled as required.
9 If the auto-white measurement has been unsuccessful, an error appears in the WHITE
BALANCE button on the CGA.
☞
Note
☞
Note
During the auto-white measurement process the iris is set to Auto and 90% and knee is
switched off.

Black balance is not necessary because black level is automatically adjusted by the camera’s
internal video circuits.
Saturation
Adjust the saturation level to increase or decrease color of the picture. Saturation values
below 100% decrease colors while values higher than 100% increase colors.
In the camera menu, navigate to the production Setup > Color > Saturation item and
adjust the level.
Color Gamut
The camera can operate using two different color gamuts:
In the camera menu, navigate to the Production Setup > Color > Color Gamut item and
select REC709 (for default HDTV color gamut) or REC2020 (for extended color gamut).
Color Protect
When very bright and saturated colored lights are used, predominant colors may clip. This
results in fully saturated areas with no detail. This phenomenon occurs especially in blue
and magenta color ranges.
The Color Protect function restores luminance levels without affecting color over-
saturation. It prevents non-dominant colors from decreasing below black level so much of
AWHITE: OK 3700K
CAM
CAM