User's Guide

82
Video setup
Variable color temperature
• AW1 - Auto White memory position 1
• AW2 - Auto White memory position 2
and one automatic continuous white position:
• AWC - Auto White Continuous measurement (from 2500 K to 20000 K)
☞
Note
☞
Note
If AWC is selected, the non-standard indicator in the viewfinder lights (only for ocular
viewfinders).
When the switch is first pressed, the viewfinder displays the current value. Select a new
value by scrolling up or down through the available values.
The viewfinder also displays the measured color temperature. The range of the auto-white
balance is from 2500
K to 20000 K.
Variable color temperature
The color temperature switch on the left-front side of the camera can also be used to vary
the color temperature continuously between its minimum and maximum value (2500 K to
20000
K).
1 Press and hold the plus or minus position until you see the value in the viewfinder
change.
2 Release the switch when you reach the value you want. This exits the value selection
mode.
3 Pressing the plus or minus position again sets the color temperature to the nearest
standard value.
Auto White Balance
If the reference color temperatures does not match your lighting conditions carry out the
Auto White Balance procedure as follows:
White Balance
button
Color Temperature
switch