User's Guide

168

Installation of (Q)SFP modules

List of (Q)SFP modules

Configuration 3 (1x 100G QSFP module)

• Remove the plastic protection cap from the QSFP module (if present).

• Place the QSFP (without fibers) into the QSFP cage.

•Insert fiber A into the top LC socket of the QSFP module and insert fiber B into the

bottom LC socket of the QSFP module.

• Reinstall the right side panel and tighten the four captive screws. Make sure that the

screws are fixed hand-tight.

• The camera is now ready for operation with the new (Q)SFP configuration.

List of (Q)SFP modules

The following (Q)SFP modules have been released for use with the LDX 100:

☞

Note

☞

Note

All listed modules have industrial specifications. Refer to your Grass Valley sales

representative for availability and prices.

QSFP cage

SFP 1 cage

SFP 2 cage

manufacturer part number: module type: description:

Eoptolink EOLP-1325G-10-RI 25G/10G SFP SM 10 km 1310 nm Single-Mode 1310 nm SFP28

Transceiver with DDM and dual

CDR

Eoptolink EOLP-1396-10-I 10G SFP SM 10 km 1310 nm Single-Mode 1310 nm 10GBASE-

LW/LR Transceiver with DDM

Eoptolink EOLQ-161HG-10-LI 100G QSFP SM 10 km LR4 Single-Mode 100GBASE-LR4

QSFP28 Transceiver

EOLQ-161HG-02-SI1 100G QSFP SM 2 km CWDM4 Single-Mode CPRI/100GBASE

CWDM4 2km QSFP28 Transceiver