User's Guide

166
Installation of (Q)SFP modules
Changing (Q)SFP modules
☞
Note
☞
Note
The inside of the panel holds the cooling pads for the (Q)SFPs. Make sure that they stay in
place and do not get deformed. Keep them free from dirt.
• Remove the LC fiber(s) from the dummy SFP module. Make sure the cable (ferrule) ends
keep clean.
• Carefully remove the inserted (Q)SFP module(s) from their case(s). If two SFP modules
are inserted, remove them one by one.
• If needed, place the new (Q)SFP module(s) into the suitable cage(s). Unused (Q)SFP
modules can be left in their cage, the camera automatically switches off (all) unused
modules.
• AFTER placing the (Q)SFP module(s), insert the fiber cables according to the desired
configuration in the next section.
Caution
Only use (Q)SFP modules that comply to LASER CLASS 1.