User's Guide

154
Video signals
IP Streams
Broadcast 4K video modes
1Go to Configuration > Signals > BNC Outputs and select Default or Phases.
2 To select the video mode for Live output go to Configuration > Signals > Live2K >
Mode
and select 1080p or 1080i. To select the dymanic range go to Configuration >
Signals > Live2K > Source and select HDR or SDR.
3 In NativeIP mode Ext1 and 2 are HD/3G or 12 G formats. Return 3 is HD/3G only
(transport formats: see IP streams in).
4 When BNC-D is set as SDI input and the applied SDI signal is a 1080p signal, level A/B is
detected automatically and level B is converted to level A as input for the internal video
router.
Filmic video modes
1 The UHD Filmic Cinema (“ UHD FilmC”) license is needed.
2 The UHD filmic Broadcast (“UHD FilmB”) license is needed.
IP Streams
Make sure that you have installed the right (Q)SFP modules that match the selected video
mode.
Connector:
4K150/179 (3X)
“Phases” profile
1)
4K50/59 (1X)
"Default" profile
1)
BNC-A Live combined out HDR (12 Gb/s) Live out HDR (12 Gb/s)
BNC-B Phase 1 out HDR (12 Gb/s) Live out 1.5 Gb/s SMPTE 292M/296M or 3 Gb/s
SMPTE 425-1 HDR or SDR
2)
BNC-C Phase 2 out HDR (12 Gb/s) Ext1, 2 or 3 (1.5 Gb/s, 3 Gb/s or 12 Gb/s)
3)
BNC-D Phase 3 out HDR (12 Gb/s) Ext1, 2 or 3 (270 Mb/s,1.5 Gb/s, 3 Gb/s or
12
Gb/s)
3)
Ext SDI input 3 Gb/s SMPTE 425-1 or 12 Gb/s
SMPTE 2082
4)
BNC-E Monitoring out SDR (3 Gb/s)
Connector:
4K23.98
1)
4K25
2)
4K29.97
2)
BNC-A UHD Live out HDR @23.98
(6 Gb/s)
UHD Live out HDR @25 
(6 Gb/s)
UHD Live out HDR @29.97
(6 Gb/s)
BNC-B HD Live out
BNC-C
BNC-D
BNC-E