User's Guide

150
Connectors
Auxiliary connector
Auxiliary connector
Pin Description
1 Return A
2 Return B
3 Tracker intercom to Production
4 Tracker intercom to ENG
5 Tracker telephone left
6 Tracker telephone return
7 Tracker telephone right
8not connected
9 Call switch
10 +12 Volt (max. 100mA)
20-pin Hirose
female connector
(panel view)
Pin Description
11 Tracker Microphone return
12 Tracker Microphone
13 GND
14 Menu select
15 Call indication
16 GND
17 Menu Up
18 Menu Down
19 ISO indication
20 On Air signal
Manufacturer code of the mating cable/plug connector: HR10A-13P-20P(C)
Below is an example for the wiring of the auxiliary connector:
1
20
680  Green: Power
[Call]
[ENG]
[PROD]
[Ret B]
[Ret A]
Green: Call
[Select]
Yellow: ISO
[Down]
[Up]
Red: On Air
(1) Return A
(2) Return B
(3) Tracker intercom to Prod
(4) Tracker intercom to Eng
(5) Tracker telephone Left (4) XLR-5 (headphones)
(3) XLR-5 (headphones)
(5) XLR-5 (headphones)
(1) XLR-5 (headphones)
(2) XLR-5 (headphones)
(6) Tracker telephone Return
(7) Tracker telephone Right
(8) Not connected
(9) Call Switch
(10) +12 VDC
(11) Tracker Mic Return
(12) Tracker Mic
(13) GND
(14) Menu Select
(15) Call indication
(16) GND
(17) Menu Up
(18) Menu Down
(19) ISO indication
(20) On Air signal