User's Guide

146

Connectors

REF/AES connector

Go to the Configuration > Signals > BNC Ref/AES setting to change the signal for this

connector.

BNC A to E connectors

The following signals are available at the BNC A to E connectors. Go to the Configuration

> Signals

menu to change the signals for these connectors.

HDMI connector

BNC connector

(panel view)

Can be programmed for Reference input, AES (AES digital audio) input, or TriLvl,

Composite reference.

BNC connector

(panel view)

These BNC connectors can be programmed for different video output signals (1.5G, 3G

or 12G). Refer to the table below for the options.

Pin Description

1 Hot Plug Detect

2 Reserved

3 TDMS Data 2+

4 TDMS Data 2 Shield

5 TDMS Data 2 -

6 TDMS Data 1+

7 TDMS Data 1 Shield

8 TDMS Data 1-

9 TDMS Data 0+

10 TDMS Data 0 shield

Micro HDMI (type D)

connector

(panel view)

Pin Description

11 TDMS Data 0-

12 TDMS Clock+

13 TDMS Clock shield

14 TDMS clock -

15 CEC

16 GND

17 SCL-HDMI

18 SDA-HDMI

19 +5 V DC power