User's Guide

18
Viewfinder setup
Diagnostics menu (DIAG)
Diagnostics menu (DIAG)
Configuration menu (CONFIG)
Indicator adjustment submenu (INDADJ)
Item Value(s) Description
EXIT DIAG Exits the diagnostics menu.
STATUS INFO Enters the viewfinder status information screen. Refer to
Viewfinder status information, on page 19.
— — —
LCD Temp nn C Info: shows the current LCD screen temperature in degrees
celsius.
Format <video formats> Info: shows the current video format.
VF Temp nn C Info: shows the current viewfinder operating temperature in
degrees celsius.
PREV ↑ NEXT ↓ Selects a menu from the list.
Item value(s) Description
EXIT CONFIG Exits the confugarion menu.
IND ADJUST Push to enter the indicator adjustment submenu; see below.
— — —
FAC TORY RESET Resets the viewfinder’s settings to their factory defaults. The
factory defaults are shown in the default column.
— — —
NoSignal Black, Input, Bars Selects signal when no camera signal is present (for example
during start-up).
PREV ↑ NEXT ↓ Selects a submenu from the list.
Item Value(s) Description
EXIT INDADJ Exits the indicator adjustment menu. The set indicator level is
stored.
IndLvl Low, Med, High Selects the indicator level for the viewfinder LED indicators.
RearTlly Ena, Dis Enables or disables the viewfinder rear tally indicator.