Specification Sheet

Specifications
Model FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160
Programmable resolution
0.005 mmMechanical resolution
Approx. 3 mm alphanumeric (varies depending on character font and media)Minimum character size
Max. 5.88 N (600 gf) in 48 stepsCutting force
Max. 39.2 m/s
2
(4 G) in 8 steps
Axial acceleration
1485 mm/s at 45º directionMaximum cutting speed
4 rollers3 rollers3 rollers2 rollers2 rollers
1750 mm1496 mm1191 mm886 mm734 mmMaximum cross cut width
1850 mm1529 mm1224 mm920 mm770 mmMaximum
50 mmMinimum
Mountable media width
1603 mm x 10 m,
894 mm x 15 m
1342 mm x 10 m,
894 mm x 15 m
1043 mm x 10 m,
894 mm x 15m
742 mm x 15 m590 mm x 15 mCutting area of guaranteed accuracy (*2)
1626 mm x 50 m1372 mm x 50 m1067 mm x 50 m762 mm x 50 m610 mm x 50 mMaximun cutting area (W x L) (*1)
Digital servo driveDrive method
Grit rolling typeConfiguration
32-bit CPUCPU
Number of push rollers
FCC-A, EN55032-AEMC
UL60950-1, cUL, CE mark (Low voltage and EMC)SafetyCompatible Standards
Windows 10 / 8.1 / 8 / 7, Mac OS X 10.6 to macOS 10.12(Graphtec Studio : 10.6-10.12, Cutting Master 4 : 10.7-10.12)
Compatible OS (*4)
Cutting Master 4, Graphtec Pro Studio, Graphtec Studio(for Mac)Supported software (*4) (*5)
59 kg including stand54 kg including stand46 kg including stand42 kg including stand38 kg including standWeight (approx.)
2138 x 715 x 1219 mm1878 x 715 x 1219 mm1578 x 715 x 1219 mm1278 x 715 x 1219 mm1128 x 715 x 1219 mmExternal dimensions (W x D x H) (approx.)
16 to 32 º3C, 35 to 70 % R.H. (non-condensing)Guaranteed accuracy environment
10 to 35 ºC, 35 to 75 % R.H. (non-condensing)Operating environment
Max. 160 VAPower consumption
100 V to 240 V AC, 50 / 60 HzPower source
Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detectRegistration mark sensing system
Up to 0.3mm with printed imageAlignment accuracy (*2)
Graphic type LCD (3-inch, backlight)Display
Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)Condition settings
GP-GL / HP-GL
TM
emulation (Set by menu or command, and selects from GP-GL, HP-GL
TM
, or Auto select)Command sets
2 MBBuffer memory
USB2.0 (Hi-Speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)Standard interface
Built into the tool carriageCross-cutter
Built into the tool carriageLight pointer
Supported (performed by force control)Perforation cutting
Regular paper from 0.06 to 0.13 mm thickCompatible paper for pouncing
Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Media types (*3)
Steel pin 1.5 mm diameter, required optional pouncing tool (PPA 33-TP12)Pouncing tool type
Water-based fiber-tip pen, Oil-based ballpoint penPen types
Supersteel (0.9 mm or 1.5 mm diameter)Blade types
1 tool (cutting blade, plotting pen or pouncing tool) in standard; 2 tools (cutting blade and plotting pen) when second penholder (optional) is installedMountable number of tools
Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) Repeatability (*2)
Max. 0.1 mm or 0.1 % of plotted lengthDistance accuracy (*2)
GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL
TM
: 0.025 mm
*1 When the 2nd pen holder is installed, the maximum cutting width is changed. (FC8600-60: 601 mm, FC8600-75: 753 mm, FC8600-100: 1053 mm, FC8600-130: 1352 mm, FC8600-160: 1613 mm)
*2 Operated with Graphtec specified media and conditions. In long-length cutting, the basket is used.
*3 When some grades of high-intensity reflective film is used, the using CB15UA/CB15UA-K30 blade and reinforcing the backing sheet of the media are recommended.
*4 For more information about compatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec.
*5 The software can be used by downloading from Graphtec website.
One additional push roller (dealer option)OPH-A22Additional push roller
Flange for media holdingOPH-A21Flange
2nd pen holder (dealer option)ECK00092nd pen holder
For FC8600-160 (Stock roller, bracket)RSK0024
For FC8600-130 (Stock roller, bracket)RSK0023
For FC8600-100 (Stock roller, bracket)RSK0022
For FC8600-75 (Stock roller, bracket)RSK0021
For FC8600-60 (Stock roller, bracket)RSK0020Media stocker
DescriptionPart No.Item
Options
1.5mm dia. 20º angle, for cutting sandblast rubberCB15U-K20-2SP
1.5mm dia. 30º angle, for cutting sandblast rubberCB15U-K30-5
1.5mm dia. supersteel bladeCB15U-5
0.9mm dia. 60º angle, for cutting thin filmCB09UB-K60-5
Cutting blade 0.9mm dia. supersteel bladeCB09UB-5
For 1.5mm dia. blade (CB15U series)PHP35-CB15-HS
For 0.9mm dia. blade (CB09U series)PHP35-CB09-HS
For 1.5mm dia. blade (CB15U series)PHP33-CB15N-HS
For 0.9mm dia. blade (CB09U series)PHP33-CB09N-HSBlade holder
Blue colour penKF700-BL
Red colour penKF700-RD
Black colour penKF700-BKWater-based fiber-tip pen
For KF700 series penPHP31-FIBERFiber-tip pen holder
Checking blade length, for PHP33 and PHP35 series PM-CT-001
Standard typeCT01H
CB15UA-K30-5 1.5mm dia. 30º, for cutting high intensity reflective film
1.5mm dia. for cutting high intensity reflective filmCB15UA-5
2 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
5 blades/pack
1 set/pack
1 set/pack
1 set/pack
1 set/pack
10 pens/pack
10 pens/pack
10 pens/pack
Steel pin 1.5mm dia.PPA33-TP12Pouncing tool
Black colour penKB700-BKOil-based ballpoint pen
For KB700 penPHP34-BALLBallpoint pen holder
1 set/pack
10 pens/pack
1 set/pack
1 set/pack
1 set/pack
High durability typeCT02U
1 blade/pack
1 blade/pack
5 blades/pack
5 blades/pack
Cross-cutter blade
Description PackagePart No.Item
Supplies
Parts kit for FC8600-75
Parts kit for FC8600-60
Basket
Set of stock rollers and mounting brackets
(Installed on the stand)
1Media stocker
Parts kit of stand1Stand
KF700-BK (black ink)1
PHP31-FIBER
Quick start and safety guide
User's manual, Windows driver, Plotter Controller
Cable for USB2.0, 2.9m long
Parts kit for FC8600-160
Parts kit for FC8600-130
Parts kit for FC8600-100
1
1
1
1
1
CB09UB1
PHP33-CB09N-HS1
The type of cord is different by destination1Power cord
Cutting blade holder
Cutting blade
Fiber-tip pen holder
Water-based fiber-tip pen
Printed document
PG0040
PG0039
PG0041
PG0042
PG0043
USB cable
DVD-ROM
DescriptionQ'tyItem
Standard accessories
• Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners.
• Items mentioned are subject to change without notice. For more information about product, please check the web site or contact your local representative.
503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan
Tel : [phone] Fax : [phone]
Email : [e-mail]
http://www.graphteccorp.com
Website
FC8600_JE10299_7D
For using equipment in correctly and safely
• The before using it, please read the user manual and then please use it properly in accordance with the description.
• To avoid an occurrence of malfunction or an electric shock by leakage, please ensure ground connection and use it in specified power source.
Loupe
www.graphtecamerica.com
17462 Armstrong Ave. Irvine, CA 92614
Sales: 949.770.6010 Tech Support: 949.860.4050
Email: [e-mail]