Instruction manual

15
All faults should be repaired by service workshop authorized by the manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Hammer Drill
Parameter Value
Rated voltage 230 V AC
Input current frequency 50 Hz
Rated power 1500 W
No load rotational speed 750 rpm
Chuck SDS-PLUS
Maximum drilling diameter
concrete 36 mm
steel 13 mm
wood 40 mm
Impact energy 4,5 J
Impact rate 3200 min
-1
Protection class II
Weight 6,03 kg
Year of production 2014
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp
A = 96 dB(A) K = 3 dB(A)
Sound power: LwA = 107 dB(A) K = 3 dB(A)
Vibration acceleration (front handle) a
h
= 9,64 m/s
2
K = 1,5 m/s
2
Vibration acceleration (rear handle) a
h
= 16,573 m/s
2
K = 1,5 m/s
2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants.
Obtain information on wastes utilization from your seller or local authorities. Used up electric and electronic
equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk
for environment and human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter
Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies,
schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright
and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later
ammendments). Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without
written permission of Grupa Topex are strictly forbidden and may cause civil and legal liability.