Full Product Manual

6 PurePower 1800 Owner’s Guide
Installation
Guidelines
Follow all instructions from this guide and instructions including
safety guidelines from the battery manufacturer. Installing battery
cables require some electrical knowledge and local electrical codes.
Tools and Materials
• Adjustable wrench for fastening DC terminal bolts,
• Two battery cables (copper, appropriately sized according to
application) with connectors already crimped by the company
or store where you purchased the cables,
• Ground cable (copper, appropriately sized) for attaching to the
ground chassis,
• DC-rated fuses (and fuse holders),
• Screwdriver (flathead and Philips), power screwdriver, or
power drill for use in mounting the inverter,
• Mounting screws (4) size #10.
Basic Installation Steps
1. Determine battery capacity.
2. Determine a charging system.
3. Choose a location.
4. Mount the inverter.
5. Connect the chassis ground.
6. Connect the battery cables.
IMPROPER INSTALLATION BY AN UNQUALIFIED INSTALLER
If you do not have some electrical knowledge and knowledge of local
electrical codes or are not comfortable installing cables yourself, use a
qualified installer including a licensed technician and electrician.
Qualified installers have knowledge and experience in installing
electrical equipment, knowledge of the applicable installation codes, and
awareness of the hazards involved in performing electrical work and how
to reduce those hazards.
Failure to follow these instructions can result in death or serious
injury.
PurePower 1800.book Page 6 Monday, December 12, 2016 5:06 PM