Use and Care Manual

www.grapesolar.com
Tel. [phone] (toll free), 1-541-349-9000, Fax: [phone]
5
Valid from May 2013
GS-CF-1.1-Fab1
Reference Manual Rev. 130515
MOVEMENT AND INSTALL ATION
When moving the freezer, the angle between the cabinet and the ground should not be more than
45 degrees C in order to protect the compressor and refrigerang system.
Posion the freezer in a dry and well-venlated place. Keep the freezer away from direct sunlight,
heaters and corrosive gases.
The normal operaon of the freezer depends on the heat radiaon of the condenser. For the inial
use, the packing foam must be taken o and at least 6” of open space must be le around the freezer.
MAIN TECHNICAL PARAMETERS
MODEL：GS-CF-1.1-Fab1 SERIAL：NO.
DC COMPRESSOR FRIDGE-FREEZER
NET VOLUME：1.1CuFt
REFRIGERANT：R134A / 35
GRAMS INSULA T ION ： CYCLO-
PENTANE
POWER IN P UT ： 55 W AC , 37W DC
CURRENT：0.25AMPS AC,
3 . 08 AM P S /1 . 54 AM P S DC
INPUT VOL T AG E ： 220 - 240 V /6 0 HZ AC,
12 / 24 V DC
CLASS： T
MADE IN CHINA
READ MANUFACTURER’S INSTRUCTIONS BEFORE USE
THIS APPLIANCE MUST BE INSTALLED ACCORDING TO THE MA NU F A C-
TURER’S INST RUC T ION S
TO BE USED ONLY IN WELL - VENTILATED AREA