Instructions / Assembly

6
www.GrapeSolar.com
Tel. [phone] (toll free), 1-541-349-9000
Document Version 200827
©Copyright 2019, Grape Solar, Inc. All Rights Reserved

GS-600-KIT-MPPT PHOTOVOLTAIC
POWER GENERATION SYSTEM
QUICK CONNECT GUIDE Rev. 200827





Use the 15-ft MC4 cables  to connect the solar panel  triad to a Zenith-40 charge controller .
Ensure that the positive and negative cable from the solar panel triad are connected to respective
input sockets on the controller. If the batteries are not full, you should begin to see power flowing into
the batteries.
DISCLAIMER:
Installations of this kit could be subject to national and local building and electrical codes. Installers should have adequate knowledge of
national and local code to ensure the installation passes inspection by the local electric authority.
Proper fuses or breakers should be used to comply with all local and national codes. Contact Grape Solar for specific recommendations.
All batteries used for this system should be identical. Do not mix battery types or sizes. Do not mix old batteries with new batteries.
Performance and charging anomalies can occur if types, sizes, or age of batteries are not identical.
Grape Solar does not warrant the accuracy, sufficiency, or suitability to all customers of any technical or other information provided in
product manuals. Grape Solar does not claim any responsibility or liability for losses, damages, costs or other expenses whether special,
indirect, consequential or incidental, which might arise out of the use of such information.