Full Product Manual

Rev
2020.04.23
16
Advanced Battery Settings
Enter Load SET Mode by pressing the Setting key in Load Mode view only.
Use the arrow key to cycle through load modes before long pressing SET to save and exit. Short
pressing SET will exit without saving.
Mode Definition Description
0
Daylight Auto-Control
DC load turns on when daylight is detected.
1~14
Daylight On/Timer O
DC load turns on when daylight is detected.
DC load turns o according to timer.
15
Manual Mode
DC load turns on/o by pressing the Return key.
16
Testing Mode
DC load turns on and o in a quick succession.
17
Always On
DC load stays on.
MPPT
【SET】
long【SET】press
save and exit setup
short【ESC】press
exit without saving
Load Mode View
Setting Load Mode