Installation Guide

EZ Standing Seam Roof
Mounting System
19 | P a g e
Landscape Panel Configuration:
The EZ Standing Seam Roof Mounting System conveniently accommodates landscape
configurations to minimize roof time and parts required. Our Shared Rail Adaptors End Clamps and
Mid Clamps kit converts standard HR Rail to shared rail to allow landscape mounting of PV panels
on E-W rails. Because the rails are shared, a two-up installation would require only three rails as
compared to four for a standard mid and end clamp system.
These pre-assembled Mid Clamps have a unique T-Bolt locking feature
that ensure the T-Bolt remains vertical and in full contact with the rail to
eliminate pull out. The spring-loaded top clamp and open collar nut
accommodates module frames from 31 to 50 mm. The added Loctite
easily engages the T-Bolt from the top of the collar nut. The shared rail
adaptor converts standard rail to shared rail to allow landscape mounting
of PV panels on E-W rails.
The SunModo self-grounding system that
includes the pre-assembled universal bonding clamp eliminates separate
module grounding hardware and saves installation cost.