Installation Guide

EZ Standing Seam Roof
Mounting System
17 | P a g e
EZ Standing Seam Roof Mounting System Installation:
1. Select the correct EZ Standing Seam Roof Mounting System to fit your roof. Snap a line or use
a laser to line up the clamps on the roof panel seams.
2. Tighten to the torque value appropriate for your roof panel material. Tighten to 10 ft. lbs. of
torque for steel panels and 8 ft. lbs. of torque for aluminum panels.
3. Install the L-Foot to the Standing Seam Clamp in the desired orientation. Then attached the
HR Series Rail to the L-Foot.
1
2
3
1
2
3