Installation Guide

Page
4
Tile Hook Roof Universal Mount
Installation Manual
Tile Modifications that may be required:
How do I make modifications on tile retaining lip profiles
that interfere with the tile resting flat against the tile hook
(figure 4)?
Tile retaining lip removal may be needed to allow for clearance of
the hook.
To do so, there are two options:
Option A (gure 5): Use a hammer to remove the lip or obstruction.
Option B (gure 6): Using a grinder, remove the lip or obstruction.
Figure 5
Figure 6
Figure 4
How do I adjust upper and
lower tile profiles that do
not allow the tile to rest
flat above the hook?
In some cases, the upper
or lower tile may need to
be modied; follow these
steps for either situation
(for
illustrative purposes, we’ll show the
upper tile modification)
Step 1 (gure 7)
Using rolled aluminum or
sheet metal ashing, cut
enough material to t the
exposed area.
Step 2 (gure 8)
Modify the tile with a slot to
allow for the tile hook to pass
through.
Step 3 (gure 9)
Insert the cut ashing under
the tile hook base and over
the lower tile. Complete
the tile hook installation as
described on page 2.
Figure 7
Figure 8
Figure 9