Installation Guide

EZ Metal Roof Mount
Attachments
9 of 12
Torque Values:
These values must be adhered to for mechanical strength. It is required that a torque wrench be used
to measure the bolt torque during final assembly, and it is recommended that anti-seize compound,
such as Permatex, be applied to the screw threads.
Caulk gun and silicon sealant
 ChemLink M1 (or equivalent) for wood and
composite roofs.
 ChemLink DuraLink (or equivalent) for metal
roofs.
Tape measure
Saws for cutting aluminum posts and rails as
necessary
Other items that can be useful:
 Chalk or Roofer’s marker to layout Metal Roof.
 Adaptor for 3/8” socket to drill chuck.
Hardware
Torque
1/4” Bolts and Hex Flange Nuts
7.5 ft. lbs.
6.3mm Self-tapping Screw
As Required
5/16 Lag Bolt
25 ft. lbs.
1-1/16” HEX Cap
15 ft. lbs.