Installation Guide

EZ Metal Roof Mount
Attachments
8 of 12
Tools Required for Installation:
Electric Drill or impact driver.
Note that the use of an impact driver is strongly
discouraged for all stainless nut and bolt hardware.
Metal Roofing Bar
Drill Bit for lag bolts, pilot hole 7/32” diameter for
5/16” lag bolt
3/8” Socket Wrench
Sockets for 3/8” drive sockets, 7/16”, 1/2”, 9/16” and
1-1/16”
Torque Wrench 3/8” drive, 0 to 35 ft. lbs.
Anti-seize compound (Permatex 80071 or
equivalent).