Installation Guide

EZ Roof Mount
Attachments
9 of 14
Torque Values:
These values must be adhered to for mechanical strength. It is required that a torque wrench be used
to measure the bolt torque during final assembly, and it is recommended that anti-seize compound,
such as Permatex, be applied to the screw threads.
Note: We strongly recommend against the use of an impact wrench except for the installation of the
Lag Bolts.
Caulk gun and silicon sealant
 ChemLink M1 (or equivalent) for wood and
composite roofs.
 ChemLink DuraLink (or equivalent) for metal roofs.
Tape measure
Saws for cutting aluminum posts and rails as necessary
Other items that can be useful:
 Chalk or roofer’s marker to layout roof.
 Adaptor for 3/8” socket to drill chuck.
 #3 Phillips bit
Hardware
Torque
1/4” Bolts and Hex Flange Nuts
7.5 ft. lbs.
1/4 X 3” Decking Fastener
As Required
5/16 X 4” Lag Bolt
25 ft. lbs.
3/8” Bolts and Hex Flange Nuts
15 ft. lbs.
3/8” T-Bolts and Hex Flange Nuts
15 ft. lbs.
Mid or End Clamp, 1/4-20 Female Standoff
with 7/16” Hex Head Collar Nut
7.5 ft. lbs.
Ground Lug: 1/4” Flange Nut with 7/16 hex drive head
7.5 ft. lbs.
Ground Lug: 1/4” setscrew with1/8 Allen drive
4.2 ft. lbs. (50 in. lbs.)
HEX Cap: 1-1/16” socket
15 ft. lbs.