Installation Guide

EZ Metal Roof Mount
Attachments
11 of 12
Installation Instructions
EZ Metal Roof Mounting Standoff Kit K10064-XXX
Installation Instructions
EZ Metal Roof Mount with C-Bracket A22001-001
Mount the AL Shoe using steps 1 and 2 (shown above).
A. Place AL Standoff on AL Shoe threads and tighten
by hand, then by wrench. Use 15 ft.-lbs. nominal
torque.
B. Using the 3/8” Flange Bolt (supplied with AL L-Foot)
attach to the top of the Standoff.
C. Install AL Rail to L-Foot to the specific orientation.
Then, tighten 3/8” Flange Nut to 15 ft-lbs. and Hex
Cap to 15 ft-lbs. torque.
Mount the C-Bracket using steps 1 and 2 (shown above).
D. Mount the C-Bracket instead of an L-Foot, using
the Hex Nut. The C-Bracket can be used to mount
a variety of rails and other Metal Rooftop
equipment.
A
B
C
D