Full Product Manual

EZ Pitched Roof System
25 of 30
Portrait Panel Configuration:
With a full range of components the Pitch Roof System can be configured in an endless variety of
designs. The system is IBC compliant for roof waterproofing tested by IAPMO, UL 1703 compliant
for Class-A Fire Rated for Type 1 and 2 PV Modules and UL 2703 compliant for electrical bonding
tested by ETL.
Proceed with the mounting of the PV panels using the Mid and End Clamps. Specific mounting
instructions are shown in the following sections for portrait mounting.
A typical portrait roof layout features two East-West rails mounted to North-South roof rafters with
an L-Foot. Mid Clamps are used between PV panels, they will produce 1/2” spacing between PV
panel frames. End Clamps are used to secure PV panels at the ends of a row.